 |
|
 |
- Color printed manual is clear and detailed.
|
 |
- Here's showing the shocks assembly
|
 |
- The following are the tips for building up the metal Anti-roll bar mount
|
 |
- You may have to use a hinge pin (not a drill bit) to enlarge the hole with a Dremal at the anti-roll bar mount in order to ensure the smoothness of the front suspension.
- The reason for using the hinge pin instead of a drill bit is to make sure a proper yet tight fit without binding.
|
 |
- As shown here . Now you can slowly turn on the Dremel.
|
 |
- Now hold the metal part and go up and down until it feels smooth
|
 |
- Carry on using a similiar procedure with the A arms
|
 |
- Install the parts and try how smooth it is. Again make sure all the components move smoothly.
|
 |
- After you've assembled the A-arms and anti-roll bar, you have to change the 1mm spacer (highlighted in this photo )come with in your 710 box.
|
 |
- We recommand the big lower bumper as an optional part
|
 |
- We also recommand installing the new universal dog bones at the front which is another optional part.
|
 |
|
 |
- After assembling the rear ball diff, you have to check the adjustable screw in the diff. First, do not tighten the screws highlighted but loosen them. Spin the rear ball diff and you'll hit some thing. Right?
|
 |
- And then see the photo that highlighted. That thing you have to cut it, otherwise…….
|
 |
- For a tight parking lot track, you cannot use the same gear radio that come with the box. Then you have to change to 16/20 pinions and 61/57 spurs.
|
 |
- The new hardest rear anti-roll bar, you must have that at big track.
|
 |
- When you assemble the gas tank, you may want to make sure it fits to the radio plate.
|
 |
- For braking control arm, please use a 3mm set screw on top of the pin as shown below. This is not indicated in the install guide from Serpent and this mod helps in making sure the brakes operate smoothly.
|
 |
- After that, install it with noraml screw.
|
 |
- Now you can see the space between the screw and the brake system
|
 |
- Now you have a really smooth brake control without binding
|
 |
- And my car is really to GO!
|
 |
- If you have any questions regaridng to Serpent 710 setting or building, please come to the shop and we are happy to help you out
|
| |
|
| |
|
| |
|
| |
|
