 |
|
 |
- Serpent 710 with MAX SIR modified engine and SIR601pipe
|
 |
- Blitz body with Rc workshop local
|
 |
|
 |
- Before the race, the diameter of the front tyre is 61.5mm
|
 |
|
 |
- After 5 mins qualify, the front tyre diameter is 61.1mm
|
 |
- And the rear tire is 61.2mm, that's mean the new 21T pully can fix the front and rear tyre problem. For nitro 1/10scale, there's always the issue with the rear tires wearing out too quickly. By the way, if you use the 21T, your car is seems like more punch go out to the corner. Is like a jet brake.
|
 |
- I was using 21T pully in PLRC race
|
 |
- Before every main, you have to check the cleannessof the air filter before racing. Otherwise, your engine will over heat easily.
|
 |
|
| |
|
